ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 42 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note: The process of editing the user information is the same as adding a new
user, except that the User ID cannot be modified while editing a user. The
process in detail refers to "
6.1 User Registration".
Delete User 6.4
On the All-Users interface, tap on the required user from the list and tap
Delete to delete the user or specific user information from the device. On the
Delete interface, tap on the required operation, and then tap OK to confirm
the deletion.
Delete Operations
 Delete User: Deletes all the user information (deletes the selected User
as a whole) from the Device.
 Delete Fingerprint Only: Deletes the fingerprint information of the
selected user.
 Delete Face Only: Deletes the face information of the selected user.
 Delete Password Only: Deletes the password information of the
selected user.
 Delete Card Number Only: Deletes the card information of the selected
user.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g