ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
on the authentication method(s) that the super administrator has registered.
6.1.3 Register Fingerprint
Tap Fingerprint in the New User interface to enter the fingerprint registration
page.
 Select the finger to be enrolled.
 Press the same finger on the fingerprint reader three times.
 Green indicates that the fingerprint was enrolled successfully.
6.1.4 Face
Tap Face in the New User interface to enter the face registration page.
 Please face towards the camera and place yourself in such a way that
your face image fits inside the white guiding box and stays still during
face registration.
 A progress bar shows up while registering the face and then "Enrolled

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g