ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 13 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4 Instruction for Use
Before getting into the device features and functions, it is recommended to be
familiar with the below fundamentals.
Finger Positioning 4.1
Recommended fingers: Index, middle, or ring fingers; avoid using the thumb
or pinky, as they are difficult to accurately press onto the fingerprint reader.
Note: Please use the correct method when pressing your fingers onto the
fingerprint reader for registration and identification. Our company will assume
no liability for recognition issues that may result from incorrect usage of the
product. We reserve the right of final interpretation and modification
concerning this point.
Too low Too close to the edge
Vertical

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g