ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 113 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 Accessories
Masks or coloured eyeglasses are not allowed. The frame of the eyeglasses should
not cover the eyes and should not reflect light. For persons with thick eyeglasses
frames, it is recommended to capture two images, one with eyeglasses and the
other one without them.
 Face
Complete face with clear contour, real scale, evenly distributed light, and no
shadow.
 Image Format
Should be in BMP, JPG or JPEG.
 Data Requirement
Should comply with the following requirements:
1) White background with dark-coloured apparel.
2) 24bit true color mode.
3) JPG format compressed image with not more than 20kb size.
4) Resolution should be between 358 x 441 to 1080 x 1920.
5) The vertical scale of head and body should be in a ratio of 2:1.
6) The photo should include the captured person’s shoulders at the same
horizontal level.
7) The captured person’s eyes should be open and with clearly seen iris.
8) A neutral face or smile is preferred, showing teeth is not preferred.
9) The captured person should be easily visible, natural in color, no harsh shadow
or light spot or reflection in the face or background. The contrast and lightness
level should be appropriate.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g