ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 106 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Test Voice
To automatically test whether the audio files
stored in the device are complete and the voice
quality is good.
Microphone test
To test if the microphone is working properly by
speaking into the microphone.
Test Fingerprint Sensor
To test the fingerprint sensor by pressing a finger
on the scanner to check if the acquired
fingerprint image is clear. When you are pressing
a finger on the scanner, the fingerprint image will
display on the screen.
Test Face
To test if the camera functions properly by
checking the pictures taken to see if they are
clear enough.
Test Clock RTC
To test the RTC. The device tests whether the
clock works normally and accurately with a
stopwatch. Touch the screen to start counting
and press it again to stop counting.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g