SpeedFace-V3L User Manual
Page | 115 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
information is necessary for you to use our products. If you do not
provide such information, you cannot use some features of the product
regularly.
2. Product information: According to the product model and your
granted permission when you install and use our services, the related
information of the product on which our services are used will be
collected when the product is connected to the software, including the
Product Model, Firmware Version Number, Product Serial Number, and
Product Capacity Information. When you connect your product to the
software, please carefully read the privacy policy for the specific
software.
II. Product Security and Management
1. When you use our products for the first time, you shall set the
Administrator privilege before performing specific operations.
Otherwise, you will be frequently reminded to set the Administrator
privilege when you enter the main menu interface. If you still do not
set the Administrator privilege after receiving the system prompt,
you should be aware of the possible security risk (for example, the
data may be manually modified).
2. All the functions of displaying the biometric information are disabled in
our products by default. You can choose Menu > System Settings to set
whether to display the biometric information. If you enable these
functions, we assume that you are aware of the personal privacy
security risks specified in the privacy policy.
3. Only your user ID is displayed by default. You can set whether to display
other user verification information (such as Name, Department, Photo,
etc.) under the Administrator privilege. If you choose to display such
To Next Page
Loading...
Need help?
General
Weight and Dimensions
