Zmorph VX User Manual

3D printing workow
67
To ensure best calibra-
tion result print calibra-
tion pattern. Choose
"Start".
Set the printing tempera-
ture to the PLA material.,
Nozzle 200 ˚C, bed 60 ˚C.
To do that tap the gaps
and type the temperature
on the keyboard.
Wait for extruder to heat
up. When done tap NEXT.
If your lament is not
loaded, feed it using
arrows on the screen. If
your lament is already
loaded choose "Next".
Wait for the machine to
nish printing pattern.
Choose "Maintenance". Choose "Calibrate". Choose "Auto 3-point".
Wait for the machine to
heat up and nish the
probing.
Take the calibration ca-
ble. The cable is included
in the box.
Connect the wider end to
the RIGHT frame socket.
Connect the narrow end
of the calibration cable to
X-carriage B socket.

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English