Zmorph VX - Page 81

3D printing workow
81
In the global menu you can set:
a) Filament - denes a lament type that will be used in the project, e.g: PLA ZMorph,
ABS ZMorph, PET ZMorph. Basing on the lament choose, Voxelizer will adapt print-
ing settings. To see the details of the print settings, click the button SEE MORE or go
to Filament preset list. If you canʼt nd lament your lament type, go to the lament
icon that opens a lament library.
b) Quality - is a simplied option to select model quality settings, allowing you to select
layer height and path width with a single slider. HQ guarantees the highest quality, at
the expense of print speed (lasts longer), while FAST guarantees faster printout, at
the expense of a larger layer, and thus lower quality. Recommended settings of 50%
guarantee the best ratio of quality to print speed. The current path values and layer
height are shown under the basic menu. Quality can also be dened separately for
different models, editing takes place in the local menu.