Zmorph VX User Manual

3D printing workow
91
Select two STL models.
The software will ask if the models should be aligned. If the models were prepared in
correct - aligned - relations between themselves, click YES. If you wish to set up the
models manually, click NO.
To the left you will nd a toolbar that allows various operations on the models. The op-
tions allow for scaling (SCALE), scaling to specic dimensions (DIMENSION), rotating
(ROTATE), and moving the model to specic position (MOVE). Remember that if the
models are aligned, you should edit them together.

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English