Zmorph VX - Page 94

3D printing workow
94
b) Quality - is a simplied option to select model quality settings, allowing you to select
layer height and path width with a single slider. HQ guarantees the highest quality, at
the expense of print speed (lasts longer), while FAST guarantees faster printout, at
the expense of a larger layer, and thus lower quality. Recommended settings of 50%
guarantee the best ratio of quality to print speed. The current path values and layer
height are shown under the basic menu. Quality can also be dened separately for
different models, editing takes place in the local menu.
c) Adaptive height - option to enable or disable the height of the Adaptive Layer. This
function allows the program to adjust the height of the print layer depending on the
geometry of the model. The path width and default layer height values change to
ranges that can be modied again using the Quality slider.