Zte ZXR10 8900 Series - Configuring Cluster Operation Commands; Maintaining a Cluster

Chapter12ClusterManagementConguration
Step
CommandFunction
5
ZXR10(config)#grouptimesynchronizeThisenablesclock
synchronizationforcluster
management.
6
ZXR10(config)#groupmember{all-candidates
|deviice<device-id>|{maac<mac-address>[
memberr<member-id>]}}
Thisaddsadesignateddevice
orMACaddressasamember
onacommanderswitch.
MaintainingaCluster
Tomaintainacluster ,performthefollowingsteps.
Step
CommandFunction
1
ZXR10(config)#groupreset-member{all
|<member_id>}
Thisrestartthememberon
thecommandswitch
2
ZXR10(config)#groupsave-member{all
|<member_id>}
Thissavesthemember
congurationonthecommand
switch
3
ZXR10(config)#grouperase-member{all
|<member_id>}
Thisdeletesthemember
congurationlefromthe
commandswitch
4
ZXR10(config)#grouptftp-server<ip_addr>Thisconguresthetftpserver
onthecluster
5
ZXR10(config)#grouptrap-host<ip_addr>
Thisconguresthealarm
receiverofthecluster
ConfiguringClusterOperation
Commands
Tocongureclusteroperationcommands,performthefollowing
steps.
Step
CommandFunction
1
ZXR10#rlogin
Thislogsinfromthecommand
switchtomemberswitchor
fromthememberswitchto
commandswitch
2
ZXR10#copy<source-device><source-file><destination
-device><destination-file>
Thisuploadsordownloads
lesthroughtheclustertftp
serveronthememberswitch
CondentialandProprietaryInformationofZTECORPORATION125