Zte ZXR10 8900 Series - Sending Packets; Setting Aging Time of Inactive Stream; Setting NM Server Address and L4 Port ID; Setting Sampling Rate

ZXR108900SeriesUserManual(BasicCongurationVolume)
SettingAgingTimeofInactiveStream
CommandFunctions
ZXR10(config)#ipstreamcacheinactive<number>
Thissetsagingtimeofinactive
stream.
Ifdataofaowarenotupdatedwithinthespeciedtime,the
aginginformationwillbenotiedtostreamrecord,inseconds,15
secondsbydefault.
SettingSamplingRate
Step
CommandFunctions
1
ZXR10(config)#interface<interface-name>Thisentersinterface
congurationmode.
2
ZXR10(config-if)#netflow-sample{ingress|egress}Thiscongurespacket
number-basedIPFIXsampling
rate.
SettingNMServerAddressandL4PortID
CommandFunctions
ZXR10(config)#ipstreamexportdestination
<ip-address>udp-port
Thissetstheaddressandportid
ofNMserver ,towhichpackets
aresent.
SettingSourceAddressforNetworkDevice
SendingPackets
CommandFunctions
ZXR10(config)#ipstreamexportsource<ip-address>
Thissetssourceaddressfor
networkdevicesendingpackets.
SettingTemplateRefreshRate
Step
CommandFunctions
1
ZXR10(config)#ipstreamtemplaterefreh-rate
number
Thissetsthenumberof
packets,afterwhichtemplate
packetissent,20bydefault.
2
ZXR10(config)#ipstreamtemplaterefreh-rate
numbertimeout-ratenumber
Thissetstemplaterefresh
ratetime,30minutesby
default.
164CondentialandProprietaryInformationofZTECORPORATION