Zte ZXR10 8900 Series - Allowing Jumbo-Frame; Configuring Traffic Control

ZXR108900SeriesUserManual(BasicCongurationVolume)
Note:
OnlytheEthernetelectricalinterfacecanbeconguredwithport
rate.Beforeconguringtheportrate,disableauto-negotiation
functionrst.
ConfiguringTrafficControl
TocongureEthernetporttrafccontrol,performthefollowing
steps.
Step
CommandFunction
1
ZXR10(config)#interface{<port-name>|byname
<by-name>}
Thisaccessesport
congurationmode
2
ZXR10(config-if)#flowcontrol{enable|disable}ThisconguresEthernetport
owcontrol
Note:
Ethernetportusestrafccontroltorestrainthepacketssentto
theportinaperiodoftime.Whenthereceivingbufferisfull,a
portsendsa“pause”packetnotifyingtheremoteporttosuspend
packettransmissionforaperiodoftime.Ethernetportcanalso
receive“pause”packetfromotherdevices,andexecuteoperations
accordingtothepacketregulation.
AllowingJumbo-Frame
Toallowjumbo-frametopasstheEthernetport,performthefol-
lowingsteps.
Step
CommandFunction
1
ZXR10(config)#interface{<port-name>|byname
<by-name>}
Thisaccessesport
congurationmode
2
ZXR10(config-if)#jumbo-frameenableThisallowsjumbo-frameto
passtheEthernetport
46CondentialandProprietaryInformationofZTECORPORATION