Zte ZXR10 8900 Series - DHCP Relay Configuration Example; Figure 20 DHCP Relay Configuration Example

Chapter7DHCPConguration
Congurationontheswitch:
ZXR10(config)#ipdhcpserverdns10.10.2.2
ZXR10(config)#ipdhcpserverleasetime90
ZXR10(config)#iplocalpooldhcp10.10.1.310.10.1.254255.255.255.0
ZXR10(config)#interfacevlan10
ZXR10(config-if)#ipdhcpmodeserver
ZXR10(config-if)#ipaddress10.10.1.1255.255.255.0
ZXR10(config-if)#ipdhcpservergateway10.10.1.1
ZXR10(config-if)#peerdefaultippooldhcp
ZXR10(config-if)#exit
ZXR10(config)#ipdhcpenable
DHCPRelayConfigurationExample
WhenDHCPclientandserverarenotinthesamesub-network,
therouterwhichconnectswithusersworksasaDHCPrelay.
TheswitchenablesDHCPrelayfunctionandasingleserver
10.10.2.2providesDHCPserverfunction.Thismodeisusually
adoptedwhenalotofhostsrequiretheDHCPservice.Thisis
showninFigure20.
FIGURE20DHCPRELAYCONFIGURATIONEXAMPLE
Congurationontheswitch:
ZXR10(config)#interfacevlan10
ZXR10(config-if)#ipdhcpmoderelay
ZXR10(config-if)#ipaddress10.10.1.1255.255.255.0
ZXR10(config-if)#ipdhcprelayagent10.10.1.1
ZXR10(config-if)#ipdhcprelayserver10.10.2.2security
ZXR10(config-if)#exit
ZXR10(config)#ipdhcpenable
CondentialandProprietaryInformationofZTECORPORATION69