Zte ZXR10 8900 Series - Chapter 17 URPF Configuration; URPF Overview

Chapter14IPTVConguration
Step
CommandFunction
3
ZXR10(config-if)#iptv[vlan{<vlan-id>|<vlan-name
>}]control-mode{package|channel}
Thisconguresmulticast
controlmodeforuser .
4
ZXR10(config-if)#iptv[vlan{<vlan-idlist>|<vlan-n
ame>}]package{name<package-name>|idlist
<package-idlist>}
Thisassignspackageforuser .
5
ZXR10(config-if)#iptv[vlan{<vlan-idlist>|<vlan-
name>}]channel{name<channel-name>|idlist
<channel-idlist>}{deny|permit|preview|query}
Thisconguresthechannel
accessprivilegeofuser
interface.
6
ZXR10(config-if)#iptv[vlan{<vlan-idlist>|<vlan-nam
e>}]cdr{enable|disable}
Thiscongureswhetherto
generateCDRrecord.
7
ZXR10(config-if)#iptv[vlan{<vlan-idlist>|<
vlan-name>}]max-access<channel-num>
Thissetsmaxuseraccesses
tochannel.
8
ZXR10(config-if)#noiptv[{vlan-id<vlan-id>|
vlan-name<vlan-name>}]package{name<
package-name>|idlist<package-idlist>}
Thisdeletespackageallocated
torule.
ConfiguringIPTVFastLeave
TocongureIPTVfastleave,performthefollowingsteps.
Step
CommandFunction
1
ZXR10(config)#iptvfast-leavemvlan<mvlan-id>ThisenablesIPTVfastleave
function.T oenablethis
function,igmpsnooping
functionmustbeenabledin
mvlan.
2
ZXR10(config)#noiptvfast-leavemvlan<mvlan-id>
ThisdisablesIPTVCAC.
ManagingIPTVUsers
TomanageIPTVusers,usethefollowingcommand.
CommandFunction
ZXR10(config)#cleariptvclient[{{slot<slot-number>
index<client-index>}|port<port-name>|vlan
<vlan-id>}]
ThismanagesIPTVusers
IPTVConfigurationExample
ExampleUserwhoconnectstoportgei_1/1isarequestinguserofmulticast
group224.1.1.1.VlanIDofthismulticastgroupis100.Thereis
onlyonechannelwithIDof0.Congurationisshownbelow.
CondentialandProprietaryInformationofZTECORPORATION145