Zte ZXR10 8900 Series - Configuring FEFI Function; Configuring Switch of Optical or Electrical Port; Configuring TCP Rate Limit; Viewing Port Information

Chapter5PortConguration
ConfiguringFEFIFunction
TocongureFEFIfunction,performthefollowingsteps.
Step
CommandFunction
1
ZXR10(config)#interface{<port-name>|byname
<by-name>}
Thisaccessesport
congurationmode
2
ZXR10(config-if)#fefi{enable|disable}ThisconguresFEFIfunction
ConfiguringTCPRateLimit
TocongureTCPratelimit,performthefollowingsteps.
Step
CommandFunction
1
ZXR10(config)#interface{<port-name>|byname
<by-name>}
Thisaccessesport
congurationmode
2
ZXR10(config-if)#tcp-synprotectrate-limit
<64-1000000>
ThisconguresTCPratelimit
ConfiguringSwitchofOpticalor
ElectricalPort
Toswitchopticalorelectricalport,performthefollowingsteps.
Step
CommandFunction
1
ZXR10(config)#interface{<port-name>|byname
<by-name>}
Thisaccessesport
congurationmode
2
ZXR10(config-if)#hybrid-attribute{copper|fiber}
Thisswitchesopticalor
electricalport
Note:
Thiscommandonlycannotbeusedonpurelyopticalorelectrical
interfaces.
ViewingPortInformation
Toviewportinformation,performthefollowingsteps.
CondentialandProprietaryInformationofZTECORPORATION49