ZyXEL Communications Ethernet Switch User Manual

Chapter 36 Load Sharing Commands
Ethernet Switch CLI Reference Guide
172
36.3 Command Examples
This example enables Equal-Cost MultiPath (ECMP) routing on the Switch and sets the
Switch to use a packet’s source and destination IP addresses to determine the routing path for
the packet.
sysname# configure
sysname(config)# ip load-sharing
sysname(config)# ip load-sharing sip-dip
sysname(config)#

ZyXEL Communications Ethernet Switch Specifications

General

Brand	ZyXEL Communications
Model	Ethernet Switch
Category	Network Router
Language	English