Ethernet Switch CLI Reference Guide
217
CHAPTER 52
Policy Commands
Use these commands to configure policies based on the classification of traffic flows. A
classifier distinguishes traffic into flows based on the configured criteria. A policy rule defines
the treatment of a traffic flow.
Configure classifiers before you configure policies. See Chapter 11 on page 59
for more information on classifiers.
52.1 Command Summary
The following section lists the commands for this feature.
Table 122 policy Command Summary
COMMAND DESCRIPTION M P
show policy Displays all policy related information. E 3
show policy <name> Displays the specified policy related information. E 3
To Next Page
Loading...
Need help?
General
