Ethernet Switch CLI Reference Guide
281
CHAPTER 73
Syslog Commands
Use these commands to configure the device’s system logging settings and to configure the
external syslog servers.
73.1 Command Summary
The following table describes user-input values available in multiple commands for this
feature.
The following section lists the commands for this feature.
Table 156 syslog User-input Values
COMMAND DESCRIPTION
type Possible values:
system, interface, switch, aaa, ip.
Table 157 syslog Command Summary
COMMAND DESCRIPTION M P
syslog Enables syslog logging. C 13
no syslog Disables syslog logging. C 13
Table 158 syslog server Command Summary
COMMAND DESCRIPTION M P
syslog server <ip-address> level
<level>
Sets the IP address of the syslog server and the severity
level.
level: 0-7
C13
no syslog server <ip-address> Deletes the specified syslog server. C 13
syslog server <ip-address>
inactive
Disables syslog logging to the specified syslog server. C 13
no syslog server <ip-address>
inactive
Enables syslog logging to the specified syslog server. C 13
Table 159 syslog type Command Summary
COMMAND DESCRIPTION M P
syslog type <type> Enables syslog logging for the specified log type. C 13
syslog type <type> facility <0-
7>
Sets the file location for the specified log type. C 13
no syslog type <type> Disables syslog logging for the specified log type. C 13
To Next Page
Loading...
Need help?
General
