ZyXEL Communications Ethernet Switch - Page 280

Chapter 72 Subnet-based VLAN Commands
Ethernet Switch CLI Reference Guide
280
72.3 Command Examples
This example configures a subnet-based VLAN (subnet1VLAN) with priority 6 and a VID of
200 for traffic received from IP subnet 172.16.37.1/24.
no subnet-based-vlan source-ip
<ip> mask-bits <mask-bits>
Removes the specified subnet from the subnet-based VLAN
configuration.
C13
no subnet-based-vlan dhcp-vlan-
override
Disables the DHCP VLAN override setting for subnet-based
VLAN(s).
C13
Table 155 subnet-based-vlan Command Summary (continued)
COMMAND DESCRIPTION M P
sysname# subnet-based-vlan name subnet1VLAN source-ip 172.16.37.1 mask-bits
--> 24 vlan 200 priority 6
sysname(config)# exit
sysname# show subnet-vlan
Global Active :Yes
Name Src IP Mask-Bits Vlan Priority Entry Active
----------- ----------- --------- ---- -------- ------------
subnet1VLAN 172.16.37.1 24 200 6 1