ZyXEL Communications Ethernet Switch - Page 220

Chapter 52 Policy Commands
Ethernet Switch CLI Reference Guide
220
This example creates a policy (Policy1) for the traffic flow identified via classifier Class1 (see
the classifier example in Chapter 11 on page 59). This policy forwards Class1 packets to port
8.
sysname(config)# policy Policy1 classifier Class1 egress-port 8 outgoing-
eport
sysname(config)# exit
sysname# show policy Policy1
Policy Policy1:
Classifiers:
Class1;
Parameters:
VLAN = 1; Priority = 0;
Egress Port = 8;
Bandwidth = 64;
Action:
Send the packet to the egress port;
sysname#