Chapter 67 SNMP Server Commands
Ethernet Switch CLI Reference Guide
266
67.2 Command Examples
This example shows you how to display the SNMP information on the Switch.
This example shows you how to display all SNMP user information on the Switch.
sysname# show snmp-server
[General Setting]
SNMP Version : v2c
Get Community : public
Set Community : public
Trap Community : public
[ Trap Destination ]
Index Version IP Port Username
----- ------- ------------ ---- --------
1 v2c 0.0.0.0 162
2 v2c 0.0.0.0 162
3 v2c 0.0.0.0 162
4 v2c 0.0.0.0 162
sysname# show snmp-server user
[ User Information ]
Index Name SecurityLevel GroupName
----- ------ ------------- --------------
1 admin noauth admin
To Next Page
Loading...
Need help?
General
