Chapter 68 STP and RSTP Commands
Ethernet Switch CLI Reference Guide
270
In this example, we enable RSTP on ports 21-24. Port 24 is connected to the host while ports
21-23 are connected to another switch
TransmissionLimit This field displays the maximum number of BPDUs that can be transmitted
in the interval specified by BridgeHelloTime.
ForceVersion This field indicates whether BPDUs are RSTP (a value less than 3) or
MSTP (a value greater than or equal to 3).
sysname(config)# configure
sysname(config)# spanning-tree
sysname(config)# spanning-tree 21-24
sysname(config)# no spanning-tree 21-23 edge-port
Table 149 show spanning-tree config (continued)
LABEL DESCRIPTION