EasyManuals Logo

ZyXEL Communications Ethernet Switch User Manual

ZyXEL Communications Ethernet Switch
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Chapter 13 Date and Time Commands
Ethernet Switch CLI Reference Guide
69
This example looks at the current time server settings.
The following table describes the labels in this screen.
sysname# show timesync
Time Configuration
-----------------------------
Time Zone :UTC -600
Time Sync Mode :USE_DAYTIME
Time Server IP Address :172.16.37.10
Time Server Sync Status:CONNECTING
Table 41 show timesync
LABEL DESCRIPTION
Time Zone This field displays the time zone.
Time Sync Mode This field displays the time server protocol the Switch uses. It displays
NO_TIMESERVICE if the time server is disabled.
Time Server IP Address This field displays the IP address of the time server.
Time Server Sync Status This field displays the status of the connection with the time server.
NONE: The time server is disabled.
CONNECTING: The Switch is trying to connect with the specified time
server.
OK: Synchronize with time server done.
FAIL: Synchronize with time server fail.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZyXEL Communications Ethernet Switch and is the answer not in the manual?

ZyXEL Communications Ethernet Switch Specifications

General IconGeneral
BrandZyXEL Communications
ModelEthernet Switch
CategoryNetwork Router
LanguageEnglish

Related product manuals