Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
139
Log Select an AP and click this button to go to the Monitor > Log > View AP Log screen to
view the selected AP’s current log messages.
Suppression On Click this button to turn suppression on.
Suppression Off Click this button to turn suppression off.
# This field is a sequential value, and it is not associated with a specific AP.
Status This field displays the on-line or off-line status of the AP, move the cursor to the AP
icon and a status pop up message will appear.
Description This field displays the AP’s description, which you can configure by selecting the AP’s
entry and clicking the Edit button.
CPU Usage This field displays what percentage of the AP’s processing capability is currently
being used.
IP Address This field displays the IP address of the AP.
Model This field displays the AP’s hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the Zyxel Device and the
information is unavailable as a result.
Group This displays the name of the AP group to which the AP belongs.
Station This field displays the station count information.
Recent On-line Time This field displays the latest date and time that the AP was logged on.
Registration This field displays the registration information of the AP. You can set the AP’s
registration at Configuration > Wireless > Controller screen. APs must be connected
to the Zyxel Device by a wired connection or network.
MAC Address This field displays the MAC address of the AP.
Mgnt. VLAN ID (AC/AP) This displays the Access Controller (the Zyxel Device) and runtime management
VLAN ID setting for the AP. VLAN Conflict displays if the AP’s management VLAN ID
does not match the Mgmnt. VLAN ID(AC). This field displays n/a if the Zyxel Device
cannot get VLAN information from the AP.
Last Off-line Time This field displays the date and time that the AP was last logged out.
Table 42 Monitor > Wireless > AP Information > AP List (continued)
LABEL DESCRIPTION
To Next Page
Loading...
