ZyXEL Communications ZyWall ATP series - Page 142

Chapter 6 Monitor
ZyWALL ATP Series User’s Guide
142
Status This field displays the current status of each physical port on the AP.
Down - The port is not connected.
Speed / Duplex - The port is connected. This field displays the port speed and duplex setting
(Full or Half).
PVID This shows the port’s PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so
that the frames are forwarded to the VLAN group that the tag defines.
Up Time This field displays how long the physical port has been connected.
VLAN
Configuration
Name This shows the name of the VLAN.
Status This displays whether or not the VLAN is activated.
VID This shows the VLAN ID number.
Member This field displays the Ethernet port(s) that is a member of this VLAN.
Ethernet Neighbor
Local Port
(Description)
This field displays the port of the Zyxel Device, on which the neighboring device is discovered.
For Zyxel Devices that support Port Role, if ports 3 to 5 are grouped together and there is a
connection to P5 only, the Zyxel Device will display P3 as the interface port number (even
though there is no connection to that port).
Model Name This field displays the model name of the discovered device.
System Name This field displays the system name of the discovered device.
Firmware
Version
This field displays the firmware version of the discovered device.
Port
(Description)
This field displays the first internal port on the discovered device. Internal is an interface type
displayed in the Network > Interface > Ethernet > Edit screen. For example, if P1 and P2 are
WAN, P3 to P5 are LAN, and P6 is DMZ, then Zyxel Device will display P3 as the first internal
interface port number.
For Zyxel Devices that support Port Role, if ports 3 to 5 are grouped together and there is a
connection to P5 only, the Zyxel Device will display P3 as the first internal interface port
number (even though there is no connection to that port).
IP Address This field displays the IP address of the discovered device.
MAC Address This field displays the MAC address of the discovered device.
Station Count
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
Last Update This field displays the date and time the information in the window was last updated.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Table 44 Monitor > Wireless > AP Information > AP List > More Information (continued)
LABEL DESCRIPTION