ZyXEL Communications ZyWall ATP series - Page 595

Chapter 34 Object
ZyWALL ATP Series User’s Guide
595
Figure 385 Configuration > Object > User/Group > MAC Address
The following table describes the labels in this screen.
34.2.5.1 MAC Address Add/Edit Screen
This screen allows you to create a new allowed device or edit an existing one. To access this screen, go
to the MAC Address screen (see Section 34.2.5 on page 594), and click either the Add icon or an Edit
icon.
Figure 386 Configuration > Object > User/Group > MAC Address > Add
The following table describes the labels in this screen.
Table 242 Configuration > Object > User/Group > MAC Address
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
MAC Address/
OUI
This field displays the MAC address or OUI (Organizationally Unique Identifier of computer
hardware manufacturers) of wireless clients using MAC authentication with the Zyxel Device
local user database.
Description This field displays a description of the device identified by the MAC address or OUI.
Table 243 Configuration > Object > User/Group > MAC Address > Add
LABEL DESCRIPTION
MAC Address/
OUI
Type the MAC address (six hexadecimal number pairs separated by colons or hyphens) or OUI
(three hexadecimal number pairs separated by colons or hyphens) to identify specific wireless
clients for MAC authentication using the Zyxel Device local user database. The OUI is the first
three octets in a MAC address and uniquely identifies the manufacturer of a network device.
Description Enter an optional description of the wireless device(s) identified by the MAC or OUI. You can
use up to 60 characters, punctuation marks, and spaces.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.