ZyXEL Communications ZyWall ATP series - Page 637

Chapter 34 Object
ZyWALL ATP Series User’s Guide
637
34.8.3.1 The Schedule Group Add/Edit Screen
The Schedule Group Add/Edit screen allows you to define a schedule group or edit an existing one. To
access this screen, go to the Schedule screen (see), and click either the Add icon or an Edit icon in the
Schedule Group section.
Figure 417 Configuration > Schedule > Schedule Group > Add
The following table describes the fields in the above screen.
Name This field displays the name of the schedule group, which is used to refer to the
schedule.
Description This field displays the description of the schedule group.
Members This field lists the members in the schedule group. Each member is separated by a
comma.
Reference This displays the number of times an object reference is used in a profile.
Table 272 Configuration > Object > Schedule > Schedule Group
LABEL DESCRIPTION
Table 273 Configuration > Schedule > Schedule Group > Add
LABEL DESCRIPTION
Group Members
Name Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Description Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.
Member List
The Member list displays the names of the service and service group objects that
have been added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to
the Member list. You can double-click a single entry to move it or use the [Shift] or
[Ctrl] key to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.