Chapter 35 Device HA
ZyWALL USG Series User’s Guide
679
Figure 448 Configuration > Device HA > Device HA Pro
The following table describes the labels in this screen.
Table 295 Configuration > Device HA > Device HA Pro
LABEL DESCRIPTION
Enable Device HA Select this to turn the Zyxel Device’s Device HA Pro feature on.
Enable Configuration
Provisioning From Active
Device.
Select this to have a passive Zyxel Device copy the active Zyxel Device’s
configuration, signatures (anti-virus, IDP/application patrol, and system protect),
and certificates.
Note: Only Zyxel Devices of the same model and firmware version can
synchronize.
Serial Number of Licensed
Device for License
Synchronization
Type the serial number of the Zyxel Device (active or passive) with the Device HA Pro
subscribed license.
Active Device
Management IP
Type the IPv4 address of the highest-numbered port on the active Zyxel Device (the
heartbeat dedicated link port).
Passive Device
Management IP
Type the IPv4 address of the highest-numbered port on the passive Zyxel Device (the
heartbeat dedicated link port).
Note: The active and passive Zyxel Device Management IP addresses must
be in the same subnet.
Subnet Mask Type the subnet mask for the management IP addresses.
To Next Page
Loading...
