Chapter 37 System
ZyWALL ATP Series User’s Guide
697
In a DNS amplification attack, an attacker sends a DNS name lookup request to an open DNS server
with the source address spoofed as the victim’s address. When the DNS server sends the DNS record
response, it is sent to the victim. Attackers can request as much information as possible to maximize the
amplification effect.
Configure the Security Option Control section in the Configuration > System > DNS screen (click Show
Advanced Settings to display it) if you suspect the Zyxel Device is being used (either by hackers or by a
corrupted open DNS server) in a DNS amplification attack.
Figure 460 Configuration > System > DNS
To Next Page
Loading...
