Chapter 38 Log and Report
ZyWALL ATP Series User’s Guide
761
USB Storage Select which event log categories to save to a connected USB storage device. There are three
choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - save log messages and alerts from this category
enable normal logs and debug logs (yellow check mark) - save log messages, alerts, and
debugging information from this category.
E-mail Server 1 E-
mail
Select whether each category of events should be included in the log messages when it is
emailed (green check mark) and/or in alerts (red exclamation point) for the email settings
specified in E-Mail Server 1. The Zyxel Device does not email debugging information, even if it is
recorded in the System log.
E-mail Server 2 E-
mail
Select whether each category of events should be included in log messages when it is emailed
(green check mark) and/or in alerts (red exclamation point) for the email settings specified in E-
Mail Server 2. The Zyxel Device does not email debugging information, even if it is recorded in
the System log.
Remote Server
1~4 Syslog
For each remote server, select what information you want to log from each Log Category
(except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this category
enable normal logs and debug logs (yellow check mark) - log regular information, alerts, and
debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Table 338 Configuration > Log & Report > Log Setting > Log Category Settings (continued)
LABEL DESCRIPTION
To Next Page
Loading...
