Index
ZyWALL ATP Series User’s Guide
841
and service objects 629
ICMP, see ICMP
TCP, see TCP
UDP, see UDP
IP security option 544
IP static routes, see static routes
IP stream identifier 544
IP v4 packet headers 544
IP/MAC binding 362
exempt list 366
monitor 128
static DHCP 365
IPSec 379, 474
active protocol 390
AH 390
and certificates 384
authentication 391
basic troubleshooting 808
certificates 397
connections 384
connectivity check 391
Default_L2TP_VPN_GW 422
encapsulation 390
encryption 391
ESP 390
established in two phases 381
L2TP VPN 421
local network 379
local policy 389
NetBIOS 388
peer 379
Perfect Forward Secrecy 391
PFS 391
phase 2 settings 390
policy enforcement 389
remote access 389
remote IPSec router 379
remote network 379
remote policy 389
replay detection 388
SA life time 390
SA monitor 156
SA see also IPSec SA 411
see also VPN
site-to-site with dynamic peer 389
static site-to-site 389
transport encapsulation 390
tunnel encapsulation 390
VPN gateway 384
IPSec SA
active protocol 411
and security policy 809
and to-ZyWALL security policy 809
authentication algorithms 406
, 407
destination NAT for inbound traffic 414
encapsulation 411
encryption algorithms 406
local policy 411
NAT for inbound traffic 413
NAT for outbound traffic 413
Perfect Forward Secrecy (PFS) 412
proposal 412
remote policy 411
search by name 157
search by policy 157
Security Parameter Index (SPI) (manual keys) 412
see also IPSec
see also VPN
source NAT for inbound traffic 413
source NAT for outbound traffic 413
status 156
transport mode 411
tunnel mode 411
when IKE SA is disconnected 411
IPSec VPN
troubleshooting 808
IPv6 208
link-local address 209
prefix 208
prefix delegation 209
prefix length 208
stateless autoconfiguration 209
IPv6 tunnelings
6in4 tunneling 250
6to4 tunneling 250
IPv6-in-IPv4 tunneling 250
ISP account
CHAP 670
CHAP/PAP 670
MPPE 670
MSCHAP 670
MSCHAP-V2 670
PAP 670
ISP accounts 668
and PPPoE/PPTP interfaces 234, 668
authentication type 670
encryption method 670
stac compression 671
To Next Page
Loading...
