ZyXEL Communications ZyWALL USG-Series - IP;MAC Binding Commands Example

Chapter 23 IP/MAC Binding
ZyWALL / USG (ZLD) CLI Reference Guide
158
23.3 IP/MAC Binding Commands Example
The following example enables IP/MAC binding on the LAN1 interface and displays the interface’s
IP/MAC binding status.
Router# configure terminal
Router(config)# ip ip-mac-binding lan1 activate
Router(config)# show ip ip-mac-binding lan1
Name: lan1
Status: Enable
Log: No
Binding Count: 0
Drop Count: 0
Router(config)#