EasyManua.ls Logo

ZyXEL Communications ZyWALL USG-Series - Snmp; SNMP Traps; Supported Mibs

ZyXEL Communications ZyWALL USG-Series
426 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 52 System Remote Management
ZyWALL / USG (ZLD) CLI Reference Guide
334
This command displays FTP settings.
52.8 SNMP
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your ZyWALL / USG supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyWALL / USG through the network. The ZyWALL /
USG supports SNMP version one (SNMPv1) version two (SNMPv2c) and version 3 (SNMPv3).
SNMP v3 enhances security for SNMP management using authentication and encryption. SNMP
managers can be required to authenticate with agents before conducting SNMP management
sessions.
Security can be further enhanced by encrypting the SNMP messages sent from the managers.
Encryption protects the contents of the SNMP messages. When the contents of the SNMP messages
are encrypted, only the intended recipients can read them.
52.8.1 Supported MIBs
The ZyWALL / USG supports MIB II that is defined in RFC-1213 and RFC-1215. The ZyWALL / USG
also supports private MIBs (zywall.mib and zyxel-zywall-ZLD-Common.mib) to collect information
about CPU and memory usage and VPN total throughput. The focus of the MIBs is to let
administrators collect statistical data and monitor status and performance. You can download the
ZyWALL / USG’s MIBs from www.zyxel.com.
52.8.2 SNMP Traps
The ZyWALL / USG will send traps to the SNMP manager when any one of the following events
occurs:
Router# configure terminal
Router(config)# show ip ftp server status
active : yes
port : 21
certificate: default
TLS : no
service control:
No. Zone Address Action
========================================================================
Table 205 SNMP Traps
OBJECT LABEL OBJECT ID DESCRIPTION
Cold Start 1.3.6.1.6.3.1.1.5.1 This trap is sent when the ZyWALL / USG is turned on or an
agent restarts.
linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is down.
linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
authenticationFailure 1.3.6.1.6.3.1.1.5.5 This trap is sent when an SNMP request comes from non-
authenticated hosts.

Table of Contents

Other manuals for ZyXEL Communications ZyWALL USG-Series

Related product manuals