Chapter 52 System Remote Management
ZyWALL / USG (ZLD) CLI Reference Guide
330
52.3.1 HTTP/HTTPS Command Examples
This following example adds a service control rule that allowed an administrator from the
computers with the IP addresses matching the Marketing address object to access the WAN zone
using HTTP service.
This command sets an authentication method Example used by the HTTP/HTTPS server to
authenticate the client(s).
This following example sets a certificate named MyCert used by the HTTPS server to authenticate
itself to the SSL client.
52.4 SSH
Unlike Telnet or FTP, which transmit data in clear text, SSH (Secure Shell) is a secure
communication protocol that combines authentication and data encryption to provide secure
encrypted communication between two hosts over an unsecured network.
52.4.1 SSH Implementation on the ZyWALL / USG
Your ZyWALL / USG supports SSH versions 1 and 2 using RSA authentication and four encryption
methods (AES, 3DES, Archfour, and Blowfish). The SSH server is implemented on the ZyWALL /
USG for remote management on port 22 (by default).
52.4.2 Requirements for Using SSH
You must install an SSH client program on a client computer (Windows or Linux operating system)
that is used to connect to the ZyWALL / USG over SSH.
Router# configure terminal
Router(config)# ip http server table admin rule append access-group Marketing zone WAN
action accept
Router# configure terminal
Router(config)# ip http authentication Example
Router# configure terminal
Router(config)# ip http secure-server cert MyCert
To Next Page
Loading...
