Chapter 37 SSL Inspection
ZyWALL / USG (ZLD) CLI Reference Guide
260
These are some example SSL Inspection certificate update usage commands.
37.2.5 SSL Inspection Statistics
This table lists the SSL Inspection statistics commands.
show ssl-inspection default-
cert version
Displays the default certificate update status.
show ssl-inspection default-
cert update
Shows the current certificate update status.
show ssl-inspection cert-update
status
Shows if automatically updating the certificate set is configured on the
ZyWALL / USG.
Router(config)# show ssl-inspection cert-update status
update auto : no
Router(config)# ssl-inspection cert-update auto
Router(config)# show ssl-inspection cert-update status
update auto : yes
Router(config)# show ssl-inspection default-cert update
/tmp/sslinsp_certs/default_trusted /
current status: Connecting to update server to get SSL certificate. at Fri Apr 10 03:47:37
2015
Router(config)# show ssl-inspection default-cert update
current status: SSL Certificate update has succeeded. (success) at Fri Apr 10 03:47:49 2015
Router(config)#
Table 151 SSL Inspection Certificate Update Commands
COMMAND DESCRIPTION
Table 152 SSL Inspection Statistics Commands
COMMAND DESCRIPTION
[no] ssl-inspection statistics
collect
Enables SSL inspection statistics collection. The no command
disables SSL exclusion statistics collection.
ssl-inspection statistics flush Clears SSL inspection statistics.
show ssl-inspection statistics
collect
Shows if SSL inspection statistics collection is enabled.
show ssl-inspection statistics
summary
Shows SSL inspection statistics such as concurrent sessions, total ssl
sessions, sessions inspected, decrypted Kbytes, encrypted Kbytes,
sessions blocked, and sessions passed.
To Next Page
Loading...
