Chapter 40 Application Object
ZyWALL / USG (ZLD) CLI Reference Guide
277
40.1.1.1 application-object Examples
These are some example usage commands.
40.1.2 Application Object Group Commands
This table lists the application object group commands.
Router(config)# show application-object
Name
Description Ref
Content
===============================================================================
tests
New Create 1
Facebook Game (access)
Router(config)# show application-object tests
Name: tests
Description: New Create
Category Application
Application ID
===============================================================================
Social Network Facebook Game (access)
402685702
Router(config)#
Table 165 object-group application Commands
COMMAND DESCRIPTION
show object-group application <object> Displays information on the named application object group.
object-group application <object> Creates an object group. with the specified name. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. The no
command disables it.
[no] description <description> Write a description of the object group.
[no] application-object <object> Adds the named application object to the object group. The no
command removes it.
[no] object-group <object> Creates an object group. The no command removes it.
no object-group application <object> Deletes the object group with the specified name.
object-group application rename <object>
<object>
Renames the specified object group with a new name.
To Next Page
Loading...
