Chapter 53 File Manager
ZyWALL / USG (ZLD) CLI Reference Guide
347
2 Enter “bin” to set the transfer mode to binary.
3 Use “cd” to change to the directory that contains the files you want to download.
4 Use “dir” or “ls” if you need to display a list of the files in the directory.
5 Use "get” to download files. For example:
“get vpn_setup.zysh vpn.zysh” transfers the vpn_setup.zysh configuration file on the ZyWALL /
USG to your computer and renames it “vpn.zysh.”
53.7.4 Command Line FTP Configuration File Download Example
The following example gets a configuration file named today.conf from the ZyWALL / USG and saves
it on the computer as current.conf.
Figure 29 FTP Configuration File Download Example
53.8 ZyWALL / USG File Usage at Startup
The ZyWALL / USG uses the following files at system startup.
Figure 30 ZyWALL / USG File Usage at Startup
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 FTP Server (ZyWALL) [192.168.1.1]
User (192.168.1.1:(none)): admin
331 Password required for admin.
Password:
230 User admin logged in.
ftp> bin
200 Type set to I
ftp> cd conf
250 CWD command successful
ftp> get today.conf current.conf
200 PORT command successful
150 Opening BINARY mode data connection for conf/today.conf (20220
bytes)
226 Transfer complete.
ftp: 20220 bytes received in 0.03Seconds 652.26Kbytes/sec.
1. Boot Module
2. Recovery Image
3. Firmware
To Next Page
Loading...
