ZyXEL Communications ZyWALL USG-Series - E-Mail Profile Commands

Chapter 54 Logs
ZyWALL / USG (ZLD) CLI Reference Guide
363
54.1.4 E-mail Profile Commands
This table lists the commands for the e-mail profile settings.
MODULE_NAME_WTP_ {user| zysh| built-in-service| system| routing-protocol| pki|
interface| account| force-auth| file-manage| wlan| daily-
report| dhcp| default| capwap| wlan-station-info| all}
WEEKDAYS {sun|mon|tue|wed|thu|fri|sat}
Table 218 logging Commands: VRPT Settings (continued)
COMMAND DESCRIPTION
Table 219 logging Commands: E-mail Profile Settings
COMMAND DESCRIPTION
show logging status mail Displays the current settings for the e-mail profiles.
[no] logging mail <1..2> Enables the specified e-mail profile. The no command disables
the specified e-mail profile.
[no] logging mail <1..2> address {ip |
hostname}
Sets the URL or IP address of the mail server for the specified e-
mail profile. The
no command clears the mail server field.
hostname: You may up to 63 alphanumeric characters, dashes (-
), or periods (.), but the first character cannot be a period.
logging mail <1..2> sending_now Sends mail for the specified e-mail profile immediately, according
to the current settings.
[no] logging mail <1..2> tls activate Select Transport Layer Security (TLS) if you want encrypted
communications between the mail server and the ZyWALL / USG.
[no ]logging mail <1..2> tls authenticate-
server
If you choose TLS Security, you may also select this to have the
ZyWALL / USG authenticate the mail server in the TLS
handshake.
[no] logging mail <1..2> authentication Enables SMTP authentication. The
no command disables SMTP
authentication.
[no] logging mail <1..2> authentication
username username password password
Sets the username and password required by the SMTP mail
server. The
no command clears the username and password
fields.
username: You can use alphanumeric characters, underscores
(_), and dashes (-), and it can be up to 31 characters long.
password: You can use most printable ASCII characters. You
cannot use square brackets [ ], double quotation marks (“),
question marks (?), tabs or spaces. It can be up to 31 characters
long.
[no] logging mail <1..2> port <1..65535> Sets the port number of the mail server for the specified e-mail
profile.
[no] logging mail <1..2> {send-log-to | send-
alerts-to} e_mail
Sets the e-mail address for logs or alerts. The
no command
clears the specified field.
e_mail: You can use up to 63 alphanumeric characters,
underscores (_), or dashes (-), and you must use the @
character.
[no] logging mail <1..2> subject subject Sets the subject line when the ZyWALL / USG mails to the
specified e-mail profile. The
no command clears this field.
subject: You can use up to 60 alphanumeric characters,
underscores (_), dashes (-), or
!@#$%*()+=;:’,./
characters.