Chapter 54 Logs
ZyWALL / USG (ZLD) CLI Reference Guide
362
This table lists the commands for the remote syslog server settings. For the purposes of this
device’s CLI, Access Points are referred to as WTPs
.
This table lists the commands for setting how often to send information to the VRPT (ZyXEL’s
Vantage Report) server.
Table 217 logging Commands: Remote Syslog Server Settings
COMMAND DESCRIPTION
show logging status syslog Displays the current settings for the remote servers.
[no] logging syslog <1..4> Enables the specified remote server. The no command
disables the specified remote server.
[no] logging syslog <1..4> address {ip | hostname} Sets the URL or IP address of the specified remote server.
The
no command clears this field.
hostname: You may up to 63 alphanumeric characters,
dashes (-), or periods (.), but the first character cannot be
a period.
[no] logging syslog <1..4> {disable | level normal |
level all}
Specifies what kind of information, if any, is logged for the
specified category.
[no] logging syslog <1..4> facility {local_1 |
local_2 | local_3 | local_4 | local_5 | local_6 |
local_7}
Sets the log facility for the specified remote server. The
no
command sets the facility to local_1.
[no] logging syslog <1..4> format {cef | vrpt} Sets the format of the log information.
cef: Common Event Format, syslog-compatible format.
vrpt: ZyXEL’s Vantage Report, syslog-compatible format.
Table 218 logging Commands: VRPT Settings
COMMAND DESCRIPTION
vrpt send device information interval <15..3600> Sets the interval (in seconds) for how often the ZyWALL / USG
sends a device information log to the VRPT server.
vrpt send interface statistics interval <15..3600> Sets the interval (in seconds) for how often the ZyWALL / USG
sends an interface statistics log to the VRPT server.
vrpt send system status interval <15..3600> Sets the interval (in seconds) for how often the ZyWALL / USG
sends a system status log to the VRPT server.
show vrpt send device information interval Displays the interval (in seconds) for how often the ZyWALL /
USG sends a device information log to the VRPT server.
show vrpt send interface statistics interval Displays the interval (in seconds) for how often the ZyWALL /
USG sends an interface statistics log to the VRPT server.
show vrpt send system status interval Displays the interval (in seconds) for how often the ZyWALL /
USG sends a system status log to the VRPT server.
MODULE_NAME_WTP {user| zysh| built-in-service| system| system-monitoring|
routing-protocol| pki| interface| interface-statistics| account|
force-auth| traffic-log| file-manage| wlan| daily-report| dhcp|
default| capwap| wlan-station-info| all}
FACILITY {local_1|local_2|local_3|local_4|local_5|local_6|local_7}
HOSTNAME "(([a-z0-9\-])+\.)+([a-z]{2}\.[a-z]{2}|[a-z]{2,4})"
USER_NAME_ "([0-9]|[a-z]|[A-Z]|[-_]|\.|\@|[0-9]|[a-z]|[A-Z]|[-_])+"
ZYLOG_SUBJECT "[a-zA-Z0-9 '()+,./:=?;!*#@$_%-]{1,61}""<subject>";
To Next Page
Loading...
