Chapter 55 Reports and Reboot
ZyWALL / USG (ZLD) CLI Reference Guide
370
This displays the email daily report settings and has the ZyWALL / USG send the report.
55.3 Reboot
Use this to restart the device (for example, if the device begins behaving erratically).
If you made changes in the CLI, you have to use the
write command to save the configuration
before you reboot. Otherwise, the changes are lost when you reboot.
Use the
reboot command to restart the device.
Router(config)# show daily-report status
email daily report status
=========================
activate: yes
scheduled time: 13:57
reset counter: no
smtp address: example-SMTP-mail-server.com
smtp port: 25
smtp auth: yes
smtp username: 12345
smtp password: pass12345
mail subject: test subject
append system name: no
append date time: yes
mail from: my-email@example.com
mail-to-1: example-administrator@example.com
mail-to-2:
mail-to-3:
mail-to-4: my-email@example.com
mail-to-5:
cpu-usage: yes
mem-usage: yes
session-usage: yes
port-usage: yes
traffic-report: yes
Router(config)# daily-report send-now
To Next Page
Loading...
