ZyWALL / USG (ZLD) CLI Reference Guide 276
CHAPTER 40
Application Object
Check that you have the latest IDP and App Patrol signatures.
40.1 Application Object Commands Summary
The following table describes the values required for many application object commands. Other
values are discussed with the corresponding commands.
40.1.1 Application Object Commands
This table lists the application object commands.
Table 163 Input Values for Application Object Commands
LABEL DESCRIPTION
<object> Type the name of the object.
<description> This is a description of the object
<sid> This is the associated IDP and App Patrol signature ID number.
Table 164 application-object Commands
COMMAND DESCRIPTION
show application-object <object> Displays information on the named application object.
application-object <object> Creates an object with the specified name. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. The no
command disables it.
[no] description <description> Write a description of the object.
[no] application <sid> Write a valid signature ID for the object. The no command disables it.
no application-object <object> Deletes the object with the specified name.
application-object rename <object> <object> Renames the specified object with a new name.
To Next Page
Loading...
