ZyXEL Communications ZyWALL USG-Series - Registration Commands

Chapter 5 Registration
ZyWALL / USG (ZLD) CLI Reference Guide
50
• The content filter allows or blocks access to web sites. Subscribe to category-based content
filtering to block access to categories of web sites based on content. Your ZyWALL / USG
accesses an external database that has millions of web sites categorized based on content. You
can have the ZyWALL / USG block, block and/or log access to web sites based on these
categories.
• You will get automatic e-mail notification of new signature releases from mySecurityZone after
you activate the IDP/AppPatrol service. You can also check for new signatures at http://
mysecurity.zyxel.com.
See the respective chapters for more information about these features.
Note: To update the signature file or use a subscription service, you have to register the
ZyWALL / USG and activate the corresponding service at myZyXEL.com (through
the ZyWALL / USG).
5.2 Registration Commands
The following table describes the commands available for registration. You must use the
configure terminal command to enter the configuration mode before you can use these
commands.
Table 8 Command Summary: Registration
COMMAND DESCRIPTION
service-register checkexpire Gets information of all service subscriptions from
myZyXEL.com and updates the status table.
show device-register status Displays whether the device is registered and account
information.
show service-register status
{all|idp|av|sslvpn|sslvpn-
status|as|content-filter|external-ap-
control|pkg}
Displays service license information.
show service-register status content-filter
{commtouch}
Displays Commtouch content filter service license
information.
show service-register content-filter-engine Displays which external web filtering service the
ZyWALL / USG is set to use for content filtering.
show service-register status as Displays whether the Anti-Spam service is registered
and account information.
debug myzyxel2 show [as|av|idp|content-
filter|sslvpn|extmaps|pkg] shm
Shows debug information for services at myZyXEL.com
debug show myzyxel-server status Shows debug information for the myZyXEL.com server.