ZyWALL / USG (ZLD) CLI Reference Guide 315
CHAPTER 51
System
This chapter provides information on the commands that correspond to what you can configure in
the system screens.
51.1 System Overview
Use these commands to configure general ZyWALL / USG information, the system time and the
console port connection speed for a terminal emulation program. They also allow you to configure
DNS settings and determine which services/protocols can access which ZyWALL / USG zones (if
any) from which computers.
51.2 Customizing the WWW Login Page
Use these commands to customize the Web Configurator login screen. You can also customize the
page that displays after an access user logs into the Web Configurator to access network services
like the Internet. See Chapter 39 on page 269 for more on access user accounts.
The following figures identify the parts you can customize in the login and access pages.
Figure 25 Login Page Customization
Logo
Title
Message
Background
(color of all text)
Note Message
(last line of text)
To Next Page
Loading...
