ZyWALL / USG (ZLD) CLI Reference Guide 339
CHAPTER 53
File Manager
This chapter covers how to work with the ZyWALL / USG’s firmware, certificates, configuration files,
custom IDP signatures, packet trace results, shell scripts and temporary files.
53.1 File Directories
The ZyWALL / USG stores files in the following directories.
53.2 Configuration Files and Shell Scripts Overview
You can store multiple configuration files and shell script files on the ZyWALL / USG.
When you apply a configuration file, the ZyWALL / USG uses the factory default settings for any
features that the configuration file does not include. Shell scripts are files of commands that you
can store on the ZyWALL / USG and run when you need them. When you run a shell script, the
ZyWALL / USG only applies the commands that it contains. Other settings do not change.
You can edit configuration files or shell scripts in a text editor and upload them to the ZyWALL /
USG. Configuration files use a .conf extension and shell scripts use a .zysh extension.
Table 208 FTP File Transfer Notes
DIRECTORY FILE TYPE
FILE NAME
EXTENSION
A
A. After you log in through FTP, you do not need to change directories in order to upload the firmware.
Firmware (upload only) bin
cert Non-PKCS#12 certificates cer
conf Configuration files conf
idp IDP custom signatures rules
packet_trace Packet trace results (download only)
script Shell scripts .zysh
tmp Temporary system maintenance files and crash dumps for
technical support use (download only)
To Next Page
Loading...
