Chapter 1 Command Line Interface
ZyWALL / USG (ZLD) CLI Reference Guide
24
Note: The default login username is admin. It is case-sensitive.
Figure 5 Web Console: Connecting
Then, the Password screen appears.
Figure 6 Web Console: Password
6 Enter the password for the user name you specified earlier, and click OK. If you enter the password
incorrectly, you get an error message, and you may have to close the console window and open it
again. If you enter the password correctly, the console screen appears.
Figure 7 Web Console
7 To use most commands in this User’s Guide, enter
configure terminal. The prompt should
change to
Router(config)#.
To Next Page
Loading...
