ZyXEL Communications ZyWALL USG-Series - Page 281

Chapter 41 Addresses
ZyWALL / USG (ZLD) CLI Reference Guide
281
41.2.1.1 Address Object Command Examples
The following example creates three IPv4 address objects and then deletes one.
Router# configure terminal
Router(config)# address-object A0 192.168.1.1
Router(config)# address-object A1 192.168.1.1-192.168.1.20
Router(config)# address-object A2 192.168.1.0/24
Router(config)# show address-object
Object name Type Address Ref.
=====================================================================
A0 HOST 192.168.1.1 0
A1 RANGE 192.168.1.1-192.168.1.20 0
A2 SUBNET 192.168.1.0/24 0
Router(config)# no address-object A2
Router(config)# show address-object
Object name Type Address Ref.
=====================================================================
A0 HOST 192.168.1.1 0
A1 RANGE 192.168.1.1-192.168.1.20 0