Chapter 53 File Manager
ZyWALL / USG (ZLD) CLI Reference Guide
352
7 Wait for the file transfer to complete.
Figure 41 FTP Firmware Transfer Complete
8 After the transfer is complete, “Firmware received” or “ZLD-current received” displays. Wait (up to
four minutes) while the ZyWALL / USG recovers the firmware.
Figure 42 Firmware Received and Recovery Started
9 The console session displays “done” when the firmware recovery is complete. Then the ZyWALL /
USG automatically restarts.
Figure 43 Firmware Recovery Complete and Restart
To Next Page
Loading...
