2N Indoor Compact - Device Configuration Interface Access; Domain Name; IP Address

Device Configuration Interface Access
2N Indoor Compact is configured via the administration web interface. Connect the device to the LAN IP
and make sure it is properly powered. You have to know the IP address for access.
Domain Name
Enter the domain name as “hostname.local”. The new device Hostname consists of the device name and
serial number. See below for the device name formats in Hostname. The serial number is entered without
hyphens. You can change Hostname in System > Network later.
Default domain name 2N Indoor Compact: 2NIndoorCompact-{serial number without dashes}.local (e.g.:
“2NIndoorCompact-0000000001.local”)
Login based on a domain name is advantageous if the dynamic IP address is used. While the dynamic IP
address changes, the domain name remains the same. It is possible to generate certificates signed by a
trusted certification authority for the domain name.
IP address
To retrieve the device IP address, take the following steps, see :
•
Use the freely accessible 2N Network Scanner.
•
Display information on the device display.
•
Use hardware (RESET button).
Software Configuration
26