2N Indoor Compact - Display

Parameter Description Example / Values
audio audio
•
audio=0 (disabled)
•
audio=1 (enabled)
fps frame rate fps=15
(1 to 30 fps, maximum MJPEG video codec value is 15 fps).
vbr video bitrate vbr=768 for 768 kbps
vcodec video codec vcodec=h264 for codec H.264
vcodec=mjpeg for codec MJPEG
vres video resolution vres=1920x1080 for FullHD
zipstream zipstream
•
zipstream=off (disabled)
•
zipstream=low
•
zipstream=medium
•
zipstream=high
•
zipstream=higher
Username – enter the username for the external IP camera authentication. The parameter is mandatory only
if the external IP camera requires authentication.
Password – enter the external IP camera authentication password. The parameter is mandatory only if the
external IP camera requires authentication.
Local RTP port – set the local UTP port for RTP stream receiving.
Camera Preview
The Camera Preview window displays the current image received from an external camera. In case the
camera is disconnected or misconfigured, N/A is displayed on a black background.
External IP Camera Log
The External IP Camera Log displays the RTSP communication with the selected external IP camera
including failures and error states if any.
Display
The Display menu helps you set the display appearance and functionality parameters as well as the parame-
ters of the menu shown on the display.
Basic Settings
Set the basic display parameters in this block.
Language – Language – set the language of the texts displayed on the screen. You can choose from
predefined languages or a user-defined language.
Date Format – set the date format to be displayed.
Software Configuration
41